Grain bin sealing and coatings
Water gets into a bin at the roof seams, the bolt lines and the joint at the joint between the steel wall and the concrete. Polyurea seals all three.

What it does
- The base ring
- The gap between the bottom ring and the foundation is where water and pests get in. A sprayed band bridges steel to concrete and stays flexible.
- Roof and seams
- Roof panels, ribs and bolt heads get one continuous skin in place of caulk that dries out and cracks.
- Foundations and pits
- Cracked stem walls, aeration tunnels and unload pits can be sealed on the same visit.
Where it goes
- Bin base rings
- Bin roofs and seams
- Concrete foundations
- Aeration tunnels
- Unload pits
- Hopper bottoms
Not on the list? Ask. The rig sprays a lot more than fits on a page.
Questions we get
Does the bin need to be empty?
For outside work on roofs and base rings, usually not. Anything inside the bin or a pit needs it empty, clean and safe to enter.
When is the best time to do it?
Between harvests, in dry weather, while the steel is clean and dry. Ask early so the bin is ready before grain goes in.



